Remanufactured Complete Mower Deck Mule Drive
Click To Enlarge

NOTE: Mule drives are only shipped via FedEx.  FedEx WILL NOT accept packages for shipment without a valid telephone number.

Made Entirely In USA!

What we've learned about the mower deck mule drive leads us to believe it is the weak link in an otherwise robust grass cutting system. While the drive appears to be well built, it just really takes a beating. We believe centrifugal force imparted by the rapidly moving belt works to pull the mule apart over time. Because the mule has inadequate side to side thrust surfaces, the wear and binding we are all too familiar with occurs. We add heavy thrust surfaces to our rebuilt mule to counteract these forces. Keep it greased and there is no telling how long our rebuilt mule will last. 

Starting with a used mule:


1. The mule is suspended in an electrolysis bath for 24 hours to remove residue, paint, and oxides.


2. The mule is then disassembled and all parts to be reused are media blasted.


3. The worn shafts are cut from the mule then milled out of the lever arms.


4. The Mule frame is tig welded to undersize then milled to accept new bearings.


5. Wear surfaces on pulley arms and mule frame are tig welded and resurfaced.


6. With new primary shaft and bearings in place pulley and tension arms are tig welded back into the assembly.


7. The grease zerk holes are drilled and threaded into the new primary shaft.


8. The secondary shaft is installed and tig welded into the assembly.


9. The entire assembly is again degreased and deoxidized using electrolysis.


10.The entire assembly is media blasted using clean glass beads. 


11. Powder Coat pre-treatment is applied and the mule assembly is heat treated at 400 degrees F.


12. Black Satin UV resistant powder coating is applied and oven cured at 400 degrees F.


13. A new John Deere tension spring and heavy duty John Deere pulleys are installed.


14. A new heavy duty mule cover with graphics embedded into the tough powder coating is installed using thread forming screws.


15. A new adjustment stud and knob are installed.


16. The refurbished mule is packed up and shipped to you.


This mule can be used on 120 140 300 312 314 316 317 318 322 330 332 John Deere Garden Tractors.


Complete mule drive does not include draft arm that connects to the deck.

There is a 5 business day processing time on all mule drives at this time.  I build mules to order in a batch production fashion. It usually takes 5 business days before I get all the parts for a particular kit through all the processes necessary. Right now, the demand is so great all the mules are sold before I can get them to a finished product.

  • Item #: Mule

Remanufactured Complete Mower Deck Mule Drive

Price: $290.00
* Marked fields are required.
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review